Table of Contents
This page gives you access to several domain administration functions. From this screen, you can:
If you need to deactivate a domain, you may do so. Administrators may deactivate any domain on a PSA server, whereas clients may deactivate any of their domains.
Each domain entry lists the domain's status, creation date and name. The domain status consists of three icons:
[OK][ON][ON]
The first status icon indicates the system status of the domain:
[OK] means that the account is operating within defined disk space and traffic parameters.
[!] means that the account has exceeded allocated disk space or traffic limitations within that domain. The PSA system evaluates disk space and traffic every 24 hours.
The second icon indicates whether the system administrator has turned a domain on or off:
[OK] means that the domain is activated.
[X] means that the domain is presently deactivated or turned off. The domain is inaccessible.
The third icon indicates if the client has turned the domain on or off:
[OK] means that the domain is activated.
[X] means that the domain is turned off and presently inaccessible.
To turn a domain ON/OFF, follow these steps:
Access the Domains function by clicking the Domains button.
Click on the domain name that you wish to change. The Domain Administration page appears.
Click On/Off button to change the domain's status.
PSA asks you to confirm that you want to change the status of the domain. Click OK to change the status, or Cancel to keep the current client status.
NOTE
If you are an administrator deactivating a domain, you should inform the client as to why the domain's status has changed.
This page allows the administrator to set domain level limitations for total disk space, the maximum number of mailboxes and the mailbox quota, mail redirects, mail groups, autoresponders, web users, and databases.. This screen also allows the set up of a mail bounce message or a catch-all email address for invalid user names. These items are used to handle mail received by this domain for mail accounts not existing within the domain. If a user wishes to change the status of the "www" prefix requirement for the domain; that would be changeable on this page. You may also pass on scripting capabilities to domain web users and setup the use of webmail for the domain.
To adjust the domain preference settings, follow these steps:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click on the Preferences button to access the Domain Preferences page. Note that there may be some preset limits set based on the limits set on the client owner of the given domain. A domain limit can not exceed the limits of the resources available to the client who owns the domain.
To set the Disk space limit, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit, in MegaBytes, in the field provided. This number represents all content within the domains root directory and sub-directories as well as disk space used by the given domain's databases.
To set the Maximum Mail Boxes, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit in the field provided.
To set the Mailbox Quota, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit, in KiloBytes, in the field provided.
To set the Maximum Mail Redirects, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit in the field provided.
To set the Maximum Mail Groups, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit in the field provided.
To set the Maximum Mail Autoresponders, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit in the field provided.
NOTE
If the value for any of these mail features is set to zero, then the client is not allowed to create that particular account type.
To set the Maximum Web Users, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit in the field provided.
To set the Maximum Databases, click on the radio button to the right for Unlimited to set the maximum as unlimited, or click on Enter Number, then enter the desired Maximum limit in the field provided.
To utilize a mail bounce message, select the radio button for Bounce with Phrase and enter the appropriate text.
To utilize a catch-all email address, select the radio button for Catch to Address and enter the appropriate e-mail address.
NOTE
You cannot select both a mail bounce message and a catch-all email address.
Check or uncheck the WWW prefix checkbox to determine whether the given domain will allow the www prefix to be used to access the domain. If the box is checked, Internet users will be able to access a domain (i.e. domain.bogus) by utilizing either the domain name itself or the domain with the "www" prefix. If the box is unchecked it will not be accessible with the "www" prefix (i.e. www.domain.bogus).
Check or uncheck the Allow scripting for web users checkbox to allow or disallow the use of scripting for web users created within the given domain. Note that this simply allows the domain owner to select from the scripting options given to the domain.
Check or uncheck the WebMail checkbox to allow or disallow the use of web based e-mail for the given domain through webmail.'domain name'.
Click the Update button to submit any and all changes and return to the Domain List page.
Click the Up Level button to ignore all changes and return to the Domain List page.
NOTE
If data is improperly entered (i.e. the wrong format of an email address, et cetera), an error message appears with an error notice.
The Plesk Server Administrator (PSA) keeps a summary of pertinent data for every domain on the PSA server. You can view this information at any time. At the top of the page, the domain being reported on is listed in boldface. The domain report includes the following information as is applicable to the given domain:
In order to utilize this feature follow these steps:
Access the Domain Management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you need to work with. The Domain Administration page appears.
Click the Report button to see the domain's data and statistics.
From here, as an administrator, you can do several things:
You can send the report as an email to the client. Your client may need this detailed information about his/her domain. Email the report to the client by clicking Send As E-mail. Or, enter a different email address in the "X" box to send the report to another administrator or individual.
You can access graphical site statistics for the domain by selecting the Webalizer option. This opens a separate window where you will see the site statistics for the given domain. It should be noted that Webalizer, by default, is set to update statistics for the domain once every 24 hours. If you attempt to access Webalizer before it has operated its first update you will receive a notice that Webalizer is either not running or has not yet been started.
NOTE
In order to be able to utilize Webalizer the Web statistics checkbox must be checked at the Physical Hosting Configuration page for this domain.
To print a copy of the domain report screen, select File/Print in your browser and a paper copy of the report will print.
To return to the domain record, click Up Level. The report will close and you will return to the domain administration page.
The Plesk Server Administrator (PSA) uses the qmail system. Because qmail does not allow the mail server to be accessed remotely, the email system is protected against spamming. You can create and manage email boxes for individuals within a domain, or your client can manage the email accounts via domain self-administration. As an administrator, you can use the domain administration page for several email administration functions:
Create, edit or delete email boxes and set individual mailbox quotas.
Redirect or forward messages from one email address to another email address.
Create, edit or delete email groups (several individual accounts grouped together under one email address for convenient multi-copy messaging).
Create, edit, or delete email autoresponders (automatic reply to email sent to the given mail name).
When you create email accounts for domain users, you are creating email boxes which will be accessible via POP3 or IMAP protocols. Mailbox creation is as easy as keying in a name and password. Follow these steps to manage mail names:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you need to work with. The Domain Administration page appears.
Click the Mail button. The Mail Names Management page appears. From this page, users can:
View the number of mail names (if any) for the given domain listed in bold.
View a list of mail names currently existing under the specified domain. To the left of each domain name on the list are four icons, each representing different mail account types. They are:
Click on a specific mail name to access the Mail Name Properties page for that given name.
Search the mail names list for a certain pattern. It may help you in case you have a great number of mail names in the system and you need to work with a particular one. To search the list, type the pattern string in the text input field and click Search.
Sort the list by various parameters. To sort the list by a certain parameter in ascending or descending order, click on the name of the parameter. An arrow will appear indicating the order of sorting: down for descending order, up for ascending.
Delete mail names. To remove one or more mail names, check the checkboxes in the Del column of the mail names list corresponding to the mail names you wish to remove and click Remove Selected. The Mail Names Removal page appears. There you will need to either confirm the removal (check the checkbox and click Submit) or Cancel it.
To create a new mail name, click in the field provided and enter the desired name. Click Add to submit this name. This will immediately take you to the Mail Name Properties page, where you can adjust the Mail Name properties.
The new Mail Name will appear on the Mail Names list.
NOTE
The four icons to the left of each mail name are faded (or grayed out) when they are not active. They appear in color when they are active. To change the status of these settings, the user must click on a given mail name, and adjust the settings on the Mail Name Properties page to enable any of the features.
This page gives the user the ability to activate any combination of POP3 Mail, Mail Redirects, Mail Groups, and Mail Autoresponders for a given mail name. To edit the mail name:
Access the Domain Management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you need to work with. The Domain Administration page appears.
Click the Mail button. The Mail Names page appears.
The number of mail names for the given domain is listed at the top of the screen.
In the mail users list, click on the name you wish to edit.
This will take you to the Mail Name Properties page.
The Mail Name text box is listed at the top of the page. By clicking in this text box, changing the mail name and clicking Update. You can change the mail name from this screen.
From this page, you can also enable and set up:
When you are done editing mail name properties, click Up Level to return to the Mail Names page.
Using this function, you can set up a mailbox account and password for a given mail name. This account will be accessible using either POP3 or IMAP protocols.
NOTE
To limit the number of mailboxes a client can have for a given account, you must access the Preferences page from the Domain Administration page.
In order to enable and set a password for a given mailbox, from the Mail Name Properties page, follow these steps:
To enable a mailbox, click in the checkbox provided next to Mailbox.
When you enable a mailbox for a particular mail account for the first time, you must enter a password.
The Old Password will say "None" if you have yet to enter a password. Once entered, the password cannot be viewed from this screen.
To enter a password, click in the New Password field and enter the selected password.
To properly update the password, you must re-enter the password in the Confirm Password field.
To set up the mailbox quota, select the Default for domain radio button to set the limit to the maximum available in the given domain, or select Enter size and enter the quota you wish to set, in KiloBytes, for the given mailbox. Note that this limit may not exceed the default set for the domain.
Once you have enabled the mailbox, entered the passwords, and set the mailbox quota, click Update to submit.
In the event that you need to change a password, simply re-enter the new password in the New Password field. Then re-enter the password in the Confirm field, and click Update.
NOTE
Once enabled, the mailbox icon on the Mail Names page appears in color.
You can forward or redirect email from one mailbox to another email address. By creating an email redirect or alias, messages are sent to a different email box without requiring the sender to know the new address. Email can be redirected to an address outside the domain. Use this redirect feature to:
Temporarily forward mail when the person who owns the mailbox is unavailable.
Send mail to a new mailbox if a mailbox user is leaving the company.
Forward mail to a new account which will eventually replace an old mailbox. (e.g. someone is changing their name but hasn't had time to inform all correspondents of the change yet).
NOTE
To limit the number of redirects a client can use, you must access the Preferences page from the Domain Administration page.
In order to enable and set a redirect for a given mail name, from the Mail Name Properties page, follow these steps:
To enable redirects for the account, click in the checkbox provided next to Redirects.
In the text box to the right, enter the appropriate address that you wish mail for this mail name to be forwarded to.
To change the redirect address for a given mail name, click on the existing entry in the Redirects box, and edit it to the new address.
Click Update to execute the changes.
NOTE
Once enabled, the Redirects icon on the Mail Names page appears in color.
A mail group is a list of several email accounts that are grouped together under one email address. This feature enables convenient multi-copy messaging. For example, if you want to send the same message to five people in the programming department, you can create a "Programming" email group that includes the individual email addresses for all five staff members. When someone sends a message to mail group "Programming", he/she only types and sends one message, but copies of the message go to all five individuals. The sender does not need to know the addresses for all five individuals, just the group name. Essentially, mail groups help save time and effort.
NOTE
To limit the number of mail groups a client can use, you must access the Preferences page from the Domain Administration page.
In order to enable and set up a mail group for a given mail name, from the Mail Name Properties page, follow these steps:
To enable mail groups for a mail name account, click in the checkbox provided next to Mail Groups.
To create a new mail group, after checking the box, click Add.
The Add Mail Groups box appears.
NOTE
Group members can consist of either external mail addresses (those not belonging to this domain) or accounts which exist within the domain.
To add an external mail address to a Mail Group, fill in the correct address in the enter external recipient mail text box, and click Add.
To add an existing account from the same domain, click on the desired address in the Select registered users list, and click Add.
The selected addresses will appear in the box to the right of the mail groups checkbox on the Mail Name Properties page.
To delete one or more group members, highlight the selected group member in the box to the left of the mail group check box. Click the Remove button.
A warning will appear. Click OK to confirm that you want to delete the address from the mail group.
After completing your changes, click Update to submit all changes.
NOTE
Once enabled, the mail groups icon on the Mail Names page appears in color.
A mail autoresponder is an automatic reply that is sent out from a given mail name when incoming mail is received at that address. Autoresponders can include both a text message and attached files. This mail function is often used on mail accounts for individuals who need an automated response because they are away, or are unable to check their mail for any number of reasons. On the autoresponders' section of the Mail Names Properties page, you can upload and include attachment files for your autoresponders, enable the autoresponders function for a given mail name, and access the autoresponders' list.
In order to enable and set up a mail autoresponder for a given mail name, from the Mail Name Properties page, follow these steps:
To enable autoresponders for a mail name account, click in the checkbox provided next to Mail autoresponders. When the check appears, autoresponders are enabled for the mail name. If you click again, it will uncheck the box, and autoresponders will be disabled.
For the Autoresponder feature you have the option to include file attachments. To include a file to be selectable within the set up of autoresponders for the given mail name, use the Browse button to search for and select the desired file(s). (File sizes should be limited to no more than 1MB.)
Click the Send File button. The attachments will then appear in the Repository.
These files will be available for any autoresponders that are set up for the given mail name. To delete one or more files highlight the desired file(s) and click the Remove button. A warning will appear prior to deleting the selected file(s).
To add a new mail autoresponder, click the Add button.
A pop-up screen prompts you to enter a name for the autoresponder. Enter the desired identification name, and click OK to submit.
The Edit Mail Autoresponder page appears.
The selected autoresponder name is listed for the given mail name account. You can click in the text box where the autoresponder name is listed, and edit the name. Click Update to submit.
The ON/OFF status for the autoresponder is shown. [ON] indicates that the autoresponder is on. [X] indicates that the autoresponder is off. You can adjust this setting by clicking the On/Off button. This status icon also appears on the autoresponders list on the Mail Names Properties page.
Beneath the Request text input box, you can determine whether an autoresponder responds to specific text found within either the subject line or body of the incoming email, or if it responds to ALL incoming requests.
To set up the autoresponder to always respond, regardless of the contained text, click the bottom radio button for always respond.
Using the Request text input box and radio buttons, you can set up the autoresponder to send an auto response when an incoming request contains defined text in its subject line or body.
Click the in the subject radio button to respond to specific text in the subject of the request, or click the in the body radio button to respond to specific text in the body of the request.
You can select a specific subject to appear in your autoresponder using the Answer with subject optoin. To simply respond with the same subject as was received from the incoming request select the radio button for the default setting. To specify a specific subject line select the radio button beside the text box and enter the desired text.
You can enter text to be included in the autoresponder in the Answer text field.
Using the Add and Remove buttons, you can attach files to be included in the autoresponder. These files must be uploaded into the Repository on the Mail Names Properties page. Select the uploaded file from the Attach files list, and use the Add button to attach the file to the autoresponder. Click Remove to remove a file.
You can specify the frequency at which the autoresponder responds to the same unique address, after receiving multiple emails from it. By clicking in the appropriate radio button next to Reply To Unique Email Address, you can set the autoresponder to always respond, to respond once, or to respond once per a specified number of days. The default setting is to respond once in one day to unique mail addresses. It is highly recommended that you leave this setting, or set to respond once in a given number of days. Selecting always respond can potentially overload your mail server. If the days value is defined as "0", then the autoresponder will respond each time a request is received.
You can define the number of unique addresses that the autoresponder will remember. Enter the desired number in the Store up to: field.
This memory enables the system to implement the answer-frequency and respond-once functionality. In the event of extremely high mail volume, to protect server performance, you can limit the address memory of the system database.
To specify an email address to which incoming requests are forwarded, enter the new email in the Forward request to e-mail field. Email requests meeting the properties established on this page will be forwarded to this alternate email address.
Through PSA, a user can customize DNS settings for each domain created. The Plesk administrator can also enable the client to customize his/her own DNS settings; however, it is very important that the client possesses a strong understanding of DNS prior to making any modifications to the DNS settings.
NOTE
Improper set up of DNS results in improper functioning of your web, mail and ftp services.
There are five types of accessible DNS records:
A = Address - This record is used to translate host names to IP addresses.
CNAME = Canonical Name - Used to create additional host names, or aliases, for hosts in a domain.
NS = Name Server - Defines an association between a given domain name and the name servers that store information for that domain. One domain can be associated with any number of name servers.
MX = Mail Exchange - Defines the location of where mail should be delivered for the domain.
PTR = Pointer - Defines the IP address and host name of individual hosts in the domain. Translates IP addresses into host names.
When you first enter this screen, you see the DNS status for the domain, as well as the default DNS settings created for the given domain. PSA will pull the default DNS settings from those set up under the SERVER DNS option.
In order to change DNS settings, follow these steps:
From the Client Home page, click the domain name that you need to work with from the list provided. The Domain Administration page appears.
Click the DNS button to access the DNS Settings page.
The DNS Zone Status icon indicates whether a DNS is turned on or off.
If you wish to turn DNS on or off for the domain, select ON/OFF.
Turning the DNS zone off will refresh the page, so that only a list of nameservers remains.
If you are running remote DNS, and therefore want to turn DNS off for the domain, you should first create the appropriate NS entries for the domain and remove any inappropriate NS entries possibly created by the default DNS template created under the SERVER function. At that point, turn DNS off. You see that the name server(s) for the domain remains listed as a link.
You can perform a test on these name servers by selecting any of them. Selecting any name server will perform an NSLookup to check for the DNS records for your specific domain on that specific name server. NSLookup is used to verify the A record for the domain, the CNAME record for www, and the MX record to ensure that these basic records are resolved properly on the remote name server. The results are interpreted and presented through the user interface.
In order to add a DNS entry, select the type of record you wish to create and select Add. Each record type has its own different set up. When created DNS entries within a specific DNS zone the name of the zone must be present for all entries. PSA sets the screen up with certain unchangeable fields in order to prevent possible errors within the zone.
For an A record you will need to enter the domain name for which you wish to create an A record. If you are simply defining an A record for your main domain, then you leave the available field empty. If you are defining an A record for a name server then you will need to input the appropriate entry for the given name server (ie. ns1). Then, you need to enter the appropriate IP address to which to associate the domain name. Then select Update to submit your entry.
For an NS record, you will need to enter the domain name for which you wish to create the NS record. If you are defining an NS record for your main domain, then you will leave the available field blank. Then, enter in the appropriate name server name in the field provided. You will need to enter in the complete name (i.e. ns1.mynameserver.com). Then, select Update to submit your entry ***For a MX record, you will need to enter the domain for which you are creating the MX record. For the main domain, you would simply leave the available field blank. You will then need to enter your mail exchanger, this is the name of the mail server. If you are running a remote mail server named 'mail.myhostname.com' then you would simply enter 'mail.myhostname.com' into the field provided. You will then need to set the priority for the mail exchanger. Select the priority, 10 being the highest and 40 being the lowest, from the drop down list. Keep in mind you also would need to add the appropriate A record, and/or CNAME if applicable for the remote mail server. Select Update to submit your entry. NOTE: Use of a remote mail server also requires backend modifications to the 'virtualdomains' and 'rcpthosts' files located in the ../qmail/control/ directory. Locations of the ../qmail/control/ directory may vary, but information on this can be found within the /etc/psa/psa.conf file.For a CNAME record, you will need to first enter the alias domain name for which you wish to create the CNAME record. You then need to enter the domain name within which you want the alias to reside. Any domain name can be entered. It does not need to reside on the same server. Select Update to submit your entry.
For a PTR record you will first enter the IP address for which you wish to define the pointer. Then enter the appropriate domain name for this IP to be translated to. Select Update to submit your entry.
You may remove any DNS records by selecting Remove beside the record you wish to delete. Before anything is processed you will be asked to confirm the deletion.
Example 1
A hosting company (we'll use abcde.com, which is for example purposes only, and is not intended to represent any existing companies or domains) wishes to setup their PSA enabled server as the primary DNS server for all the domains they create and will run secondary DNS services on an external server (the recommended configuration). The PSA enabled server has an IP address of 10.10.10.1 and the external name server has an IP address of 10.10.10.2. These addresses will be used for ns1.abcde.com and ns2.abcde.com respectively. IP address 10.10.10.1 is also the main server IP address that was set up during PSA installation.
NOTE
All name servers need to be properly registered. They need to specifically be registered as name servers with Internic. Also, all domains must be registered with the appropriate name server information.
*The first step in the process is to create the domain abcde.com on the server. By default, when a domain is initially created, even before hosting has been configured, PSA sets up a DNS record for the domain. This DNS record is created based on the DNS template that is created by the Admin under the SERVER - DNS option. For the purpose of this example we will use the default setup prior to any modifications made by the Admin under the SERVER - DNS option. With this default setup a properly registered domain will resolve. However the setup does require some modification. The initial assumptions are that the domain is a name-based account and that DNS, Mail and FTP services are to be handled locally. So the resulting default DNS settings for a domain named abcde.com are as follows:
*The next step is to create A records for the name server names you will be using. Every name server name must have a specific IP Address associated with it. Manipulate the DNS records for abcde.com to reflect the following. Exact instructions for adding and removing DNS records are described earlier in the section or can be found by selecting Help within PSA.
No other entries are needed.
*From that point on you would only need to change the NS records for each individual domain, such as abcde2.com, to be ns1.abcde.com and ns2.abcde.com and then remove the A record that is created for the default name server (ns.abcde2..com). The result for a different domain, abcde2.com, would be as follows:
This would be repeated for all the domains created on the server.
NOTE
PSA creates the Primary Zone Files for every domain on the server. It will not create any Slave Zone Files for the secondary DNS. If you plan to setup both primary and secondary name servers locally on your PSA machine it important to understand that you will technically have no Slave Zone Files. For some registrars this can cause rejection of your domain registration request. It is always recommended that secondary DNS services be run on a separate physical server from the primary.
Example 2
A hosting company, abcde.com, wishes to run both their primary and secondary DNS services remotely from the PSA enabled server. They have two name servers: ns1.anameserver.com and ns2.anameserver.com. Their PSA enabled server has the IP-Address of 10.10.10.1.
NOTE
By default, when a domain is created in PSA, it is assumed that DNS is being resolved locally. In the case described above, abcde.com needs to add in the appropriate NS records within each newly created domain and then turn DNS off for that domain.
*The first step is to modify the default PSA DNS settings for the new domain, abcde.com, to include the appropriate NS records. The result would be as follows:
*Then select the On/Off button. PSA will remove the DNS records, however you will still see the records that you had entered as the NS records for the domains. The result would be as follows:
You can then perform a test on these name servers by selecting either of them. Selecting either name server will perform an NSLookup to check for the DNS records for your specific domain on that name server. If there are any errors PSA will report them to you.
You may have hosting privileges established in your domain so that you can provide various Internet services (e.g. software applications, a forwarding address, and FTP transfers). PSA allows three different types of hosting services, as listed below. To access the hosting settings, follow these steps:
Access the Domain Management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Hosting button. The hosting type page appears. When you provide hosting for a client's domain, PSA offers three types of hosting services:
Physical Hosting - This is the most common type of hosting service, creating a virtual host (disk space on the local server) for the client. The client controls and publishes his own website without having to purchase a server and dedicated communication lines.
Standard Forwarding - With this type of forwarding, all requests to the domain are forwarded by your server to another Internet address (no virtual server is created). When an end user searches the Internet for the client's domain, he is routed to another URL, and the address in his browser window changes to the new URL. This may be confusing to the end user.
Frame Forwarding - All requests to this domain are forwarded to another Internet address (no virtual server is created). But with this type of forwarding, the end user sees the client's domain name in his browser, not the forwarding address. PSA uses frames to 'trick' the browser into displaying the correct domain name. The problem with this type of forwarding is that some search engines do not index these frame pages and some browsers do not support frames.
Click the radio button for the hosting service you wish to define.
Click Next to configure the hosting service. Depending upon the type of service chosen, a customized hosting configuration page appears.
NOTE
If you edit the domain's hosting services and choose a different type of hosting, PSA warns you that all current settings will be lost. You can either proceed or keep the present settings.
You can also delete all the domain's hosting data - forwarding links (for forwarding type of hosting), web users, databases, protected directories, etc. (for physical type of hosting) - by clicking the Delete button. You will be asked to confirm deletion of the hosting information.
There are several settings to configure for physical hosting. It is helpful to use the TAB key to move between fields when configuring your account.
You access this page from the Hosting Type page when you select Physical Hosting. Use this page to set up or modify a physical hosting account.
Depending on the limits set within the given Client's Preferences, you can create two different types of virtual hosts: name-based or IP-based. The Plesk Server Administrator (PSA) defaults to the most commonly used type, name-based. If you want to change the host type, click the IP-based choice. Then, select a valid IP address from the drop down list. The list of available IP's will reflect the settings within the given Client's Preferences.
NOTE
You can create additional IP addresses using PSA's IP Aliasing feature found within the Server section.
You must set an FTP login name and password. FTP allows end users to upload and download files from the Internet site to remote PCs. If you want to provide FTP services, click in the FTP login box. Then, enter or edit a login name to be used for accessing FTP file transfer services on the domain.
TAB to the FTP Password text box and enter or edit the FTP password.
TAB to the Confirm FTP Password text box and enter the FTP password for confirmation.
TAB to the Traffic limit text box and enter or edit the number of megabytes available for monthly transfers. If the traffic limitation is exceeded, the domain's status will change to [!].
The Delete Apache Log Files text box allows you to decide whether or not you would like the Apache log files to be deleted automatically, if at all. The default setting will say NEVER, indicating that no automated deletion will occur. If you prefer to enable the deletion function, click on the drop-down arrow; then, you can choose between the WEEKLY and MONTHLY deletion frequencies.
TAB to the FrontPage Support check box to install FrontPage server extensions into the domain. FrontPage is Microsoft's Web publishing tool. It is one of the most commonly used tools for creating a client's website. FrontPage includes several extensions that provide special functionality. If you want this domain to support these extensions, be sure that a check mark appears in the FrontPage box.
TAB to the Authorization Enabled choice. You can authorize or disable remote editing of the website using FrontPage. If you are supporting FrontPage, you should disable authorization for additional security. This setting is changeable by the Admin, Client, and Domain User logins to the control panel. For security purposes the main server administrator should notify their Clients and Domain Users that FrontPage authorization should be disabled whenever not in use. To activate FrontPage authorization, make sure this choice is selected. If you want to turn off FrontPage authorization, select the Authorization Disabled choice.
If FrontPage support is selected, then the FP Admin Login,FP Admin Password, and Confirm Password fields must be entered. This login and password will be used to login to the domain when FrontPage is being used. Click in each box and enter the desired Login and Password.
NOTE
For security reasons, the FrontPage admin password will be hidden after initial creation.
TAB to the SSI support check box. SSI stands for 'server-side include', a type of HTML comment that directs the web server to dynamically generate data for the Web page whenever information is requested. SSI can also be used to execute programs and insert the results; therefore they represent a powerful tool for web developers. If your client wants to support SSI, make sure a check mark appears in the SSI box.
TAB to the PHP support check box. PHP is a server-based HTML embedded scripting language used to create dynamic Web pages. If your client wants to support PHP scripting in HTML documents, make sure a check mark appears in the PHP box.
TAB to the CGI support check box. CGI is a set of rules that describes how a web server communicates with another piece of software on the same machine, and how the other piece of software (based on the CGI program) communicates back to the web server. If your client wants to support CGI, make sure a check mark appears in the CGI box.
TAB to the mod_perl support check box. Perl is an interpreted high-level programming language. Perl is very popular among System Administrators who use it for a vast number of automation tasks. Many CGI programs are written in Perl. If your client wants to support Perl, make sure a check mark appears in the mod_perl box.
TAB to the Apache ASP support checkbox. Apache::ASP allows for the use of Active Server Pages utilizing with Perl scripting only. It enables the development of dynamic web applications with session management and embedded perl code.
TAB to the SSL support check box. SSL certificates provide additional security for Web sessions. SSL certificates are often used for e-commerce applications and other private or confidential applications. Enabling SSL creates an httpsdocs directory in the FTP account, and provides https protocol; as a result, users access the domain with the command https://newdomain.com. If you want to grant permission to your client to implement an SSL certificate, make sure a check mark appears in the SSL box.
TAB to the Web statistic check box. Activation of web statistics will result in the installation of a graphical statistics package for the domain. This package is accessible via the PSA interface within the given domain's Report page or via the internet using the URL http://'domainname'/webstat.
TAB to the Apache ErrorDocs checkbox. Selecting this option will place the domain's error documents into a location that is accessible via FTP allowing users to customize their own Apache error documents.
When you are satisfied that you have fully defined the hosting services for this domain, click Update to return to the Domain Administration page.
NOTE
If you want a different hosting type other than physical hosting, then click Back to return to the hosting type page.
NOTE
If you do not want to save these physical hosting parameters, click Up Level to delete any entries made on the page, and return to the Domain Administration page.
Configuring a standard forwarding service is easy, it requires only one setting:
You access this page when you create Hosting services on a domain using standard forwarding. Use this page to set up or modify the hosting account.
Click in the Destination URL text box and enter or edit a URL address. Users will be redirected to this address when they access your client's domain on the web. The URL change will be visible in the browser.
Click Update to return to the Domain Administration page.
NOTE
If you want a different hosting type other than standard forwarding, click Back to return to the hosting type page.
NOTE
If you do not want to save these hosting parameters, click Up Level to delete entries made on this page and return to the Domain Administration page.
For frame forwarding, you only need to configure one setting.
You access this page when you create Hosting services on a domain with frame forwarding. Use this page to set up or modify the hosting account.
Click in the Destination URL text box and enter or edit a URL address. Users will be redirected to this address when they access your client's domain on the web. The URL change will not be visible in the browser.
Click Update to return to the Domain Administration page.
NOTE
If you want a different hosting type other than frame forwarding, click Back to return to the hosting type page.
NOTE
If you do not want to save these hosting parameters, click Up Level to delete entries made on the page and return to the Domain Administration page.
A web user is a user account within Apache. It is used to define locations for personalized web pages with individual FTP access. The result of creating a web user is a subdirectory within your domain (e.g. domain.com/~webuser).
A list of all of the web users within a given domain will appear on the main Web Users page. At this page you can:
Select any web user name to edit the web user password and/or to add or remove different scripting options (provided the Allow scripting for web users option has been activated at the Domain Preferences page).
Search the web users' list for a certain pattern. It may help you in case you have a great number of web users in the system and you need to work with a particular one. To search the list, type the pattern string in the text input field and click Search.
Sort the list by various parameters. To sort the list by a certain parameter in ascending or descending order, click on the name of the parameter. An arrow will appear indicating the order of sorting: down for descending order, up for ascending.
To create a new web user:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Web Users button. The Web Users page appears.
On the top of the screen, the number of web users displays for the selected domain.
To add a web user, enter the name of the new web user in the text box provided next to Web user name and click Add.
You are taken to the Web User Configuration page, where you must enter and confirm the password for your new web user and select from the available scripting options for the given domain (availability of scripting options is set in the Domain Preferences). To do this, enter a password in the New Password text box, and then re-enter it in the Confirm Password text box. Then select from the available scripting options if applicable. Once you have completed all entries click on Update to enter the information. Selecting Up Level will return you to the Web Users page without assigning a password or scripting capabilities to the given web user. Although the directory will be create, it will not be accessible via FTP using the web user name.
As you create web users, the user names appear on the Web Users page in the web user list.
To change web user passwords or edit scripting options, click on the user name in the web user list. This takes you to the Web User Configuration page. Follow the same procedure as taken in Step 6.
To delete existing web users select the users that you wish to delete using the checkboxes on the right of the screen and select Remove Selected. You will be asked for confirmation prior to final deletion of the web users.
When you are done, click Up Level to return to the Domain Administration page.
To remove one or more web users, check the checkboxes in the Del column of the web users' list corresponding to the web users you wish to remove and click Remove Selected. The Domain Removal page appears. There you will need to either confirm the removal (check the checkbox and click Submit) or Cancel it.
Important Notes on Web Users
For security purposes, the password must be between 5 and 14 characters and cannot contain the user name.
Each web user creates a system account within Apache; therefore, you cannot have two web users with identical names on the same server.
New web users can access the directory using FTP software by entering the domain name under which the web user account was created and using the appropriate web user name and password.
This feature is active if virtual hosting has been configured for the domain. It creates and provides password-protected access to the directories where the secure documents reside in the virtual domain. It is possible to create directories under either the standard virtual host accessible via http protocol, or if applicable for the given domain, under the SSL virtual host accessible via https protocol (to enable SSL, check the SSL support checkbox at the Hosting Configuration page for the given domain). Icons are used next to each directory name in the directory list to define which virtual host type (SSL or non-SSL) the directory resides within. An open lock depicts non-SSL; a closed lock depicts SSL.
NOTE
We strongly recommend that you create and change directories through the Plesk Server Administrator software and not within the FTP program. PSA may not recognize manual changes.
Follow these steps to create secure directories for the domain:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Directories button. The Protected Directory List page appears. The top of the page states how many protected directories there are for a given domain.
To create a new protected directory select Add.
This takes you to the Protected Directory Control page. Enter the name of the protected directory you wish to create in the Protected Directory field provided.
For Directory Location: you can choose either a non-SSL or SSL secure directory. To choose a non-SSL directory, click in the radio button next to Non-SSL. To choose SSL security for the directory, click in the radio button next to SSL.
If the directory has SSL enabled, it will appear in the Protected Directory list with a blue Lock icon beside it. If the directory is non-SSL, a gold Unlocked icon will appear next to the directory name in the directory list.
Click in the Header Text text box. When a user tries to access the protected directory, the text in this box displays as the Realm they are entering. In this text box, enter the header text.
To add a new user, under Protected Directory Users click in the New User: text box, and write the name of the directory user.
Click the Add button.
You are taken to the directory user password screen. Here you must enter your new password in the New Password text box, and then enter it again in the Confirm Password text box.
Click the Update button to submit. You will return to the Protected Directory Control page. The new user will appear in the Protected Directory Users list. Clicking Up Level will return to the Protected Directory Control page without creating a password for the given user. Although the user is created no access to the directory will be granted until a password is created for the user.
To remove existing directory users select the users that you wish to remove using the checkboxes on the right of the screen and select Remove Selected. You will be asked for confirmation prior to final deletion of the directory users.
To access a directory user in order to edit the user password, click on the user name in the list, and you will again be taken to the directory user password screen. Enter your new password in the New Password text box, and then enter it again in the Confirm Password text box.
Select Update to submit your changes and return to the Protected Directory Control page.
Once you have completed everything within your new protected directory Click Update to complete all changes to the system and to return to the Protected Directory List page.
You can edit a protected directory definition to:
Follow these steps to edit protected directories:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Directories button. The Protected Directory List page appears.
Click on any directory from the list that you wish to change.
You will be taken to the Protected Directory Control page.
From here, you can edit the directory by following the same steps outlined above, in the Creating a Protected Directory section.
Click Update to complete all changes to the system and to return to the Protected Directory List page.
PSA allows you to search the Protected Directory List for a certain pattern. It may help you in case you have a great number of directories in the system and you need to work with a particular one. To search in the list:
Select the input field and type in the pattern string.
Click the Search button.
If there were any items found matching the pattern string entered, they will all be displayed in the form of the reduced Protected Directory List.
If no matches were found it will be so stated.
The button Show All will revert to displaying the whole list of domains.
There is also another way to ease the process of working with a large list of directories. An option of sorting the list by several various parameters is made available to you. You can sort the list by several parameters. To sort the list by a certain parameter in ascending or descending order, click on the name of the parameter. An arrow will appear indicating the order of sorting: down for descending order, up for ascending.
To remove one or more directories, follow these steps:
Check the checkboxes in the Del column of the Protected Directories List corresponding to the directories you wish to remove.
Click on Remove Selected. The Protected Directory Removal page appears.
For every directory you chose to remove the name of the directory and the names of this directory users will be displayed.
If you are certain that the displayed information is correct and wish to proceed with deleting, check the "Yes, I have read, understood, and agree to remove protect from these domains" checkbox. Then click Submit. If you decide to not delete these directories or wish to modify the list of directories chosen for deletion, click the Cancel button.
Both buttons will return you to the Protected Directory Management page, one committing the changes, the other one leaving everything unchanged.
NOTE
Removing a protected directory in PSA does not delete the directory off the server. It simply takes the protected status off the directory. Meaning that the directory and its contents will now be reachable via the Internet without the need for login and password.
PSA enables you to upload a Secure Socket Layer (SSL) Certificate, generate a Certificate Signing Request (CSR), generate a Self-signed Certificate, and/or purchase a SSL certificate through a registered certificate authority. Each certificate represents a set of rules used when exchanging encrypted information between two computers. Certificates establish secure communications; this is especially important when handling e-commerce transactions and other private transmittals. Only authorized users can access and read an encrypted data stream. If your client intends to implement SSL support for a virtual host domain, you can grant permission for SSL capabilities to the domain. From that point, your client can implement the SSL certificate by self-administering his/her domain.
Important Notes on Certificates
In order to use SSL certificates for a given domain, the domain MUST be set-up for IP-Based hosting.
When an IP-based hosting account is created with SSL support, a default SSL certificate is uploaded automatically. However, this certificate will not be recognized by a browser as one that is signed by a certificate signing authority.
The default SSL certificate can be replaced by either a self-signed certificate or one signed by a recognized certificate-signing authority. The self-signed certificate is valid and secure, but many clients prefer to have a certificate signed by a known Certificate Signing Authority.
You can acquire SSL certificates from various sources. You can purchase a certificate directly through your control panel interface through the Buy Certs option; using our services website My.Plesk.com (MPC). Also, you can generate a certificate with the SSLeay utility and submit it to any valid certificate authority. This can be done using the CSR option within PSA.
If using a SSL certificate issued by a certificate authority other than Thawte or Verisign, a rootchain certificate is required to appropriately identify and authenticate the certificate authority that has issued your SSL certificate.
If the given domain has the www prefix enabled, you must set-up your CSR or self-signed certificate with the www prefix included. If you do not, you will receive a warning message when trying to access the domain with the www prefix.
Remember to enter your certificate information in PEM format. PEM format means that the RSA Private Key text must be followed by the Certificate text.
All certificates are located in the ../vhosts/'domain name'/cert/httpsd.pem file. Where this directory reads "domain name", you must enter the domain name for which the certificate was created.
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
If you have established an IP based hosting account with SSL support, the Certificate button will be enabled.
Click the Certificate button. The SSL certificate setup page appears.
The Certificate Information: section lists information needed for a certificate signing request, or a self-signed certificate. You must fill out these fields before generating your CSR or self-signed certificate.
The Bits selection allows you to choose the level of encryption of your SSL certificate. Select the appropriate number from the drop down box next to Bits:.
To enter the information into the provided text input fields (State or Province, Locality, Organization Name and Organization Unit Name (optional)) click in the text boxes and enter the appropriate name.
To enter the Domain Name for the certificate, click in the text box next to Domain Name: and enter the appropriate domain.
The domain name is a required field. This will be the only domain name that can be used to access the Control Panel without receiving a certificate warning in the browser. The expected format is www.domainname.com or domainname.com.
Click on either the Self-Signed or Request button.
Clicking Self-Signed results in your certificate being automatically generated and installed.
Selecting Request results in the sending of a certificate-signing request (CSR) to the email address you provided in the certificate fields discussed above. When a CSR (certificate signing request) is generated there are two different text sections, the RSA Private Key and the Certificate Request. Do not lose your RSA private key. You will need this during the certificate installation process. Losing it is likely to result in the need to purchase another certificate.
When you are satisfied that the SSL certificate has been generated or the SSL certificate request has been correctly implemented, click Up Level to return to the Domain Administration page.
To purchase a certificate through My.Plesk.com (MPC), first complete the steps given in items 1 - 12 of the previous instruction (generating a self-signed certificate or a certificate-signing request) and then proceed to:
Click on the Buy Certs button to gain access to the certificate management interface on My.Plesk.com. The MPC Gate page appears.
This page allows you to create an account (the Create Account button) and access (the Log In button) MPC from where you are taken through step-by-step instructions on how to purchase and manage your certificate.
In case you already have an existing account on MPC but forgot the password for it, there is a button provided especially for such occasions: Forget Password? Click it and enter your MPC account login name when requested into the provided text input field. Your password will be sent via e-mail to the address specified in your user profile.
When you are satisfied that the SSL certificate has been generated or the SSL certificate request has been correctly implemented, click Up Level to return to the Domain Administration page.
NOTE
If you do not wish to purchase certificates at this time but do wish to view the certificates currently owned by you, you may proceed directly to the MPC Gate page by clicking the Veiw Certs button. At that you will not be prompted to fill in the details at the SSL Certificate setup page.
For instances where a CSR was generated inside PSA the system is designed to save the RSA Private Key for this specific CSR inside of the system database. This feature will allow a user to take the formally signed certificate from the Certificate Authority and upload it to the server without the private key. PSA will find the private key for the given certificate and install it properly on the server in PEM format. To do this operation follow the process below.
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Certificate button. The SSL Certificate page appears.
If you wish to upload a Certificate File authorized by the Certificate Signing Authority, click the Browse: button under the Upload previously bought Certificate File (without private key) section to select the file (the file must be in .txt format)
Then, click Send File to copy the certificate to the server.
For certificates purchased using a CSR not generated through the PSA interface it is imperative that you include both the RSA Private Key text block and the Certificate text block in one file before selecting to upload this to the PSA server. To do this operation follow the process below.
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Certificate button. The SSL Certificate page appears.
If you wish to upload a file from a local computer, under the Uploading Certificate File section, click the Browse: button to select the file (the file must be in .txt format).
Then, click Send File to copy the certificate to the server. Or, if you want to type in the text of the certificate without downloading a specific file, click in the text box and enter and paste the certificate information.
Click Send Text to implement the text on the server.
NOTE
Ensure that the private key text block is included along with the SSL certificate text block when using the Send File or Send Text options.
Example Format:
-----BEGIN RSA PRIVATE KEY-----
[[ENCRYPTED BLOCK OF TEXT]]
-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
[[ENCRYPTED BLOCK OF TEXT]]
-----END CERTIFICATE-----
When you download the certificate to the server, PSA checks for errors. If an error is detected, PSA restores the old version of the SSL certificate, and PSA warns you to update the certificate. At this point, you can try again to enter text or to download the certificate file.
When you are satisfied that the SSL certificate is correctly implemented, click Up Level to return to the Domain Administration page.
If you are using a certificate that has been signed by an authority other than Thawte or Verisign then it is likely that this will require the use of a rootchain, or CA, certificate. To install a rootchain certificate for the domain:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Certificate button. The SSL Certificate setup page appears.
The icon next to Use rootchain certificate for this domain appears on this page.
If the icon is [ON] then the rootchain certificate will be enabled for this domain. If the icon is [X] this function will be disabled.
To change the status of the rootchain certificate, click the On/Off button.
To upload your rootchain certificate, first make sure that it has been saved on your local machine or network. Use the Browse button to search for and select the appropriate rootchain certificate file.
Then click the Send File button. This will upload your rootchain certificate to the server to assure proper authentication of the certificate authority.
When you are satisfied that the rootchain certificate is correctly implemented, click Up Level to return to the Domain Administration page.
Within PSA the Administrator, or Client given domain creation capabilities, can setup Anonymous FTP capabilities for a given IP-based virtual host. Anonymous FTP is used to allow an open, yet controlled, environment for visitors to the domain to download and/or upload files to and from the domain account. Users will be able to log into ftp.'domain name' with the standard anonymous user name and any password. PSA allows the setup and limitation of incoming file space, connected users, and bandwidth usage throttling. Administrators should take care when allowing the use of anonymous FTP and be sure to use all the limitation capabilities within the interface wisely. If setup with excessive limits, it could lead to problems with server resources as well as excessive bandwidth usage.
To set up Anonymous FTP:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Anonymous FTP button. The Anonymous FTP Feature Management page appears.
By default anonymous FTP capabilities will be inactive. To activate anonymous FTP select the On/Off button. The status indicator next to Anonymous FTP account status will identify the status as either ON or X (off).
Select the checkbox beside Allow uploading to incoming directory to allow visitors access the anonymous ftp site to upload files into the /incoming directory.
Select the checkbox beside Limit disk space in the incoming directory to set the disk space quota (i.e. hard limit) on the /incoming directory. Then select the Up to field and enter the disk space, in KiloBytes, you wish to allow for the /incoming directory. If no specific limit is set, or zero is used in the Up to field, the setting is unlimited.
Select the checkbox beside Limit maximum simultaneous connections number to set limits on the number of users who can be simultaneously connected to the anonymous FTP site. Then select the Up to field and enter the number of connections allowed. If no specific limit is set, or zero is used in the Up to field, the setting is unlimited.
Select the checkbox beside Limit download bandwidth for this virtual FTP domain to set throttling up for the anonymous FTP site. Then select the Up to field and enter the maximum average bandwidth, in KiloBytes per second, allowed. If no specific limit is set, or zero is used in the Up to field, the setting is unlimited.
Once you have completed all changes, select Update to submit all changes and return to the Domain Administration page.
Selecting Up Level will ignore all changes made and return to the Domain Administration page.
Within PSA there is the ability to create multiple mysql databases as well as multiple users within each database. Also, directly accessible via PSA, is a link to PhpMyAdmin, a PHP interface that abstracts mysql into a web-based administration tool, allowing you to sort, edit, and create tables within a given database. Database limits are set through domain preferences and database disk usage is calculated within the domain's total allotted disk space.
PSA allows you to search the Database List for a certain pattern. It may help you in case you have a great number of databases in the system and you need to work with a particular one. To search in the Database List:
Select the input field and type in the pattern string.
Click the Search button.
If there were any items found matching the pattern string entered, they will all be displayed in the form of the reduced Database List.
If no matches were found it will be so stated.
The button Show All will revert to displaying the whole list of databases.
There is also another way to ease the process of working with a large list of databases. An option of sorting the list by several various parameters is made available to you. You can sort the Database List by Type and Database Name. To sort the list by a certain parameter in ascending or descending order, click on the name of the parameter. An arrow will appear indicating the order of sorting: down for descending order, up for ascending.
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Databases button. The Databases Feature Management page appears.
To add a new database select the Database name field, enter the desired name, and select Add. The Database Editing page appears.
To add database users to the newly created database enter the user name into New user text box and select Add. The Database User Management page appears.
Enter your new password in the New Password text box, and then enter it again in the Confirm Password text box. Select Update to complete the creation of the new user. Selecting Up Level will ignore all entries and return to the Database Editing page making no changes.
Once you have completed the creation of the new database and its users select Up Level to return to the Database Feature Management page.
To add further databases, follow the steps outlined in 1-7 above. To return to the Domain Administration page select Up Level.
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Databases button. The Databases Feature Management page appears.
Click on the database that you wish to edit. The Database Editing page appears.
To add database users to the selected database enter the user name into New user text box and select Add. The Database User Management page appears.
Enter your new password in the New Password text box, and then enter it again in the Confirm Password text box. Select Update to complete the creation of the new user. Selecting Up Level will ignore all entries and return to the Database Editing page making no changes.
To edit the password of an existing database user, select the user from the database user list. The Database User Management page appears.
To delete existing database users select the users that you wish to delete using the checkboxes on the right of the screen and select Remove Selected. You will be asked for confirmation prior to final deletion of the selected users.
To access and/or edit database content you can do so using the PhpMyAdmin option. PhpMyAdmin provides a web-based graphical interface for mysql. This can be used to make content edits to your existing databases.
Once you have completed all edits of the database and its users select Up Level to return to the Database Feature Management page.
To delete existing databases select the databases that you wish to delete using the checkboxes on the right of the screen and select Remove Selected. You will be asked for confirmation prior to final deletion of the selected databases.
To edit further databases, follow the steps outlined in 1-11 above. To return to the Domain Administration page select Up Level.
The domain user setup provides entry to the PSA control panel within a single domain. Domain users have the ability to administer mail accounts, web users, databases, protected directories, and the domain ssl certificate. Limits to the domain user are set by the Client and/or Administrator using the Domain Preferences.
Access to the control panel for the database user is done using https://'domain name':8443. The control login will be the domain name, and the password will be whatever is set through the control panel.
To set up the Domain User:
Access the domain management function by clicking on the Domains button at the top of the PSA interface. The Domain List page appears.
Click the domain name that you want to work with. The Domain Administration page appears.
Click the Domain User button. The Domain User Properties page appears.
To allow access to the control panel for the database user select the checkbox for Allow domain user access.
Enter the password in the New Password text box, and then enter it again in the Confirm Password text box. Select Update to complete the creation of the domain user and return to the Domain Administration page.
Selecting Up Level will ignore any changes and return to the Domain Administration page.